Ultralight, quiet and powerful! With the tiny design of 100mm wheelbase and BT2.0 300mAh 1S battery, small body contains so much energy! This little beast will bring you unprecedented outdoor flight experience!
- Uses lighest F4 1S Brushless FC V2.1, which only weights 2.69g without cable. This FC possesses efficient STM32F411CEU6 processor and tuned Betaflight MATEKF411RX (MK41R), which achieved maximum weight savings.
- Equips with BetaFPV exclusive designed BT2.0 connector, which can support 9A continuous current and 15A burst while the PH2.0 connector just supports 4.5A continuous current.
- The high efficient combination of light 1102 13500KV motor and durable 65mm 2- blade props brings the drone with excellent flight performance and achieves the noise-reducing function.
- Super light with a total weight of 28.09g, installs with customized HX100 SE carbon fiber frame.It is specially made of material and also matted, which makes this frame more textured and durable.
- The drone comes with BT2.0 - PH2.0 adapter cable in default, which is convenient for customer who uses PH2.0. We also released the BT2.0 tester and charger, its charging current has been upgraded from 0.5A to 1A, which makes the charge speed increase to 2 times.
- Item: HX100 SE FPV Quad
- Weight: 28.09g (without battery)
- FC&ESC: F4 1S Brushless FC V2.1
- Motors: 1102 13500KV Motors
- Props: Gemfan 65mm 2-blade props(1.5mm shaft hole)
- Camera & VTX : M01 AIO Camera 5.8G VTX
- Frame:HX100 SE Carbon Fiber Frame
- Canopy: Canpy for HX100 SE
- Receiver Option: Frsky XM / DSMX / Futaba S-FHSS
- Battery: BT2.0 300mAh 1S Battery
- Flight time: 4 mins in a smooth outdoor flight, 2:30 mins in full throttle outdoor flight
BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. BT2.0 connector decreased internal resistance of connector effectively to allow more current that is transferred, which means it supports 9A continuous current(15A burst) offers stronger power and longer flight time on 1S brushless drones while PH2.0 just supports 4.5A You can enjoy more flight time without disturb of low voltage warning through solving the problem of voltage sag. For more instruction, click here to reach.
There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this testing. You could see that it has double time (about 2minutes) with BT2.0 connector.
Much more choices of BT2.0 series accessories.
We know some of pilots might have a question about how to deal with the old PH2.0 1S battery. So we provide some accessories like BT2.0 Power whoop connectors for those people who wanna convert the PH2.0 connector to BT2.0 connector.
- BT2.0 Connectors (10pcs)
- BT2.0 1S Whoop Cable Pigtail
- BT2.0-PH2.0 Adapter Cable
- BT2.0 Battery Charger and Voltage Tester
- BT2.0 300mAh 1S Battery
F4 1S Brushless FC V2.1 - The lightest 1S brushless FC in the current market. With slim and sleek design, 2.69g in weight and better performance on function for maximum weight savings, power, and responsiveness.
- CPU: STM32F411CEU6 ( 100MHZ )
- Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)
- Size: 29mm x 29mm, fully compatible with the whoop frame in the current market.
- Firmware version: Betaflight MATEKF411RX (MK41R)
- OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
- Power Cable: 60mm, with BT2.0 connector, 1.25mm motor header pins
- Power supply: 1S
- Current: 5A continuous and peak 6A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: O_L_5_REV16_6.HEX
- Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
Customized 1102 13500KV motor - With an ultra-light weight of 3.01g and adopts the technology of ball bearing, which effectively reduced the friction between the bearing surfaces, increased the duration of motor and improved its efficiency.
The M01 AIO camera is with a super Mini 5.8GHz FPV Transmitter + 600TVL FPV Camera + RG178 Antenna. It has both fast response and clear image.
What's more, M01 vtx board is super light and perfectly suitable for HX100 SE canopy. SmartAudio is supported. Comes with 25° and 35° camera tilts mount in default, 35° mount is suitable for high-speed flight, while 25° mount is for lower speed flight.
- TVL: 600TVL
- FOV: H:120°/V:100°
- Video System: NTSC
- Horizontal Resolution: 640X480 1/4”
Note: How to change the frequency or output power via remote control, please check the manual Smart Audio. Download the STL file for the customized HX100 SE canopy.
- 1 * HX100 SE FPV Quad
- 1 * BT2.0 300mAh 1S Battery
- 1 * BT2.0-PH2.0 Adapter Cable
BetaFpv HX100 SE (BNF FrSky)
- Brands BetaFPV
- Product Code: HX100 SE FrSky
- Availability: 2
- Ex Tax: 119.90CHF